Manually activate enterprise OFFICE 2013

To trigger activation manually on the KMS client,


cmd

CD \Program Files (x86)\Microsoft Office\Office15


the run :  cscript ospp.vbs /act

Replace Cisco 3750 in stack with different IOS versions

Hi,

If you had a problem with Cisco switch , in a stack, and the replacement switch is under a different IOS version you shoud do an upgrade or a downgrade.


In my case i downgraded the replacement switch to the same version of the existing switch:


1. download de 12.2(35) bin image from Cisco ( need Contract for that)

2. copy tftp://192.168.1.198/imagename.bin flash:

3. dir flash

4.boot system flash:/imagefilename.bin

boot system flash:c3640-i-mz.122-10.bin

boot system flash:c3640-i-mz.122-10.bin

boot system flash:c3640-i-mz.122-10.bin

Your switch should boot now with the new downgraded image..

copy tftp://10.1.1.1/iosimage.bin tftp:

copy tftp://10.1.1.1/iosimage.bin tftp:

copy tftp://10.1.1.1/iosimage.bin tftp:

copy tftp://10.1.1.1/iosimage.bin tftp:

How to add Printer manually in your Windows 7 Operating System computer?

There are two methods to Add Printer manually in your Windows 7 Operating System computer.

Method 1: How to install local printer in Windows 7 Operating System?

For installing local printer, you may follow the steps given below:

1. First, Click on the Start button in your screen, further click on Control Panel button and then double click on Devices and Printers button.
2. Then click on Add a Printer button in the menu.
3. Further select the Add a local printer button from the available menu.
4. Then choose an existing LPT port and click Next button .
5. Further select the correct driver from the driver list menu for your printer. Suppose if the requisite driver is not available then click on the Windows Update button. After the Windows 7 Update installation finishes in your computer, once again search for the appropriate driver for your printer.

Method 2: How to install network printer in Windows 7 Operating System?

The following are the steps for adding a shared printer in your Windows 7 Operating System computer:

1. First, click on the Start button in your screen, further, click on Control Panel button and then double click on Devices and Printers button.
2. Then click on Add a Printer button in the menu.
3. Further select the Add a local printer button from the next available menu.
4. Then select the Create a new port button in the menu. Further choose the Local Port button as the type of the port in the existing menu.
5. Then go to the box with title Enter a port name and then type the address in the following format:

\\[I.P. address of your host computer]\[Share Name of the printer in the computer][Please remove the - [] - and substitute it with - "<>" while actually doing it].
and then click Next button in the menu.

6. Go and select the appropriate driver for your printer from the driver list available there. In case of the required driver is not available, you may click on the Windows Update button for updating your Windows 7 Operating System. Soon after the update for Windows 7 Operating System finishes, you can once again search for the appropriate driver for your printer.
Reference www.microsoft.com

FireFox Homepage won´t change

Home page won't set to my home page

 

change firefox homepage always revert to old page that was set:

You need to remove the file local-settings.js to stop using mozilla.cfg

local-settings.js..(Program files\Mozilla Firefox\defaults\pref) 

See:

• http://kb.mozillazine.org/Locking_preferences

all link: http://support.mozilla.org/en-US/questions/906803

 

LDAP OVER SSL for connecting ASA VPN USers TO Active Directory

Users connected through ASA 5510 VPN remote access configured with LDAP. 

When they connect to AD, user and password appear clear on the internal Sniffer.

Try to resolve this with:

1. Ldap over SSL configured on the ASA side

2. LDap over SSL in active directory:  


http://www.christowles.com/2010/11/enable-ldap-over-ssl-ldaps-on-windows.html






Test LDAP SSL: 


To confirm that LDAP over SSL is configured successfully

 Open the Ldp snap-in. 
To open Ldp, click Start. In Start Search, type ldp. Right-click the Ldp icon on the Start menu, and then click Run as administrator. 

If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes. 

Click the Ldp Connection menu, and then click Connect.
 In Server, type the host name of the server to which you want to connect. Ensure that Port is set to 636, the Connectionless check box is cleared, and the SSL check box is selected, and then click OK. 

If you receive a message that says “Cannot open connection,” LDAP-over-SSL binding is not configured properly.
 Click the Connection menu, click Bind, and then click OK. 

The command output should display the user name and domain name that you used for binding, if LDAP over SSL is configured properly.

GBIC SHOW SERIAL COMMAND ERS8600

ERS-8610:5# show sys pluggable-optical-modules info 1/15 detail




http://blog.michaelfmcnamara.com/2010/06/digital-diagnostic-monitoring-interface-on-ers-8600/

Callpilot Manager Reset Password

Re: CALLPILOT Manager Password Reset

Start -> Programs -> CallPilot -> System Utilities -> Support Tools

Username :distributor(all lowercase)
Password : dst.CP4 (all case sensitive)

Start -> Programs -> CallPilot -> System Utilities -> Support Tools
select (9) Database Utilities
Select (3) Database API Utility

At the CI> prompt, type resetadminpwd and press

After reset you should login to manager with:

mailbox: 000000
pass: 124578